Acadre – internal information

We need a description of the customer's network, including the IP addresses of the Acadre server – both for the live and the test servers.

The customer needs the IP addresses of our teonprodappXX and teontestXX servers. Link: https://wiki.incorp.dk/dokuwiki/doku.php?id=drift:brug_af_ip_adresser#ips_at_tdc_hosting

As an alternative to VPN connections, we can use Sundhedsdatanettet.

In our end, we need to add 1-1 NAT between our local IP addresses and our external IP addresses. If the customers use IP addresses which are too common, for example 192.168.1.0/24, they will have to do the same.

Our side of the VPN connection will be set up by TDC Hosting. We need to contact a network expert at the customer's end.

We need to know the memo type ID that we plan to use in Sensum. The memo type ID is the Acadre equivalent of JournalEntryType which we will use to create journalnotater. For example the ID of 'Notat'.

We also need the URL of the end points in Acadre. They may look like this:

http://ip address/Acadre/Acadre.CM.PublicServices/

Moreover, we need access to both the AcadreServiceV4 and AcadreServiceV6 end points. In the configuration only the common part of these should be entered, for example something similar to above.

Normally Acadre uses NTLM to log into Acadre with their Active Directory account. We do not support NTLM and we therefore require that the administrators set up Acadre to use Basic Authentication from our servers.

They must also set a default domain for the web service end points, as the domain (probably) cannot be set when using Basic Authentication.